Supermicro X5DPA-G, User Manual, Page: 63 / 80

Chapter 4: AMIBIOS
4-13
X
Intel PCI-64 Hub 2 Configuration
This feature allows the user to configure the settings for Intel PCI-64 Hub2
PCIHub chipset.
HotPlug Inhibit Bus Connect
Select "Enabled" to enable the function of "Inhibit Bus Connect Status" in
HotPlug Controller. The options are "
Enabled " and "Disabled."
PCI Slot1 & Slot2 Frequency
This feature allows the user to set the maximum PCI bus speed to be pro-
grammed. When set to "Auto", the bus speed will be decided based on the
capabilities of the device on that particular bus. The options are "
Auto ", "33
MHz", "66 MHz", "100 MHz", and "133 MHz".
USB Configuration
This feature allows the user to configure USB settings.
Legacy USB Support
Select "Enabled" to enable the support for USB Legacy. The options are
"Disabled", and "
Enabled ."
USB Mass Storage Device Configuration
This feature allows the user to configure USB Mass Storage Device
settings.
USB Mass Storage Reset Delay
This feature allows the user to set the reset delay for USB Mass
Storage. The options are "
10 Sec ", "20 Sec", "30 Sec" and "40 Sec".
X X
X X
X
X X X X X
X
Super IO Configuration
OnBoard Floppy Controller
Select "Enabled" to enable the Onboard Floppy Controller. The options are
"Disabled", and "
Enabled ."
Serial Port1 Address
This option specifies the base I/O port address and Interrupt Request ad-
dress of serial port 1. Select
"Disabled" to prevent the serial port from
accessing any system resources. When this option is set to Disabled , the
serial port physically becomes unavailable
.