![background image](http://html1.mh-extra.com/html/supermicro/x13sav-lvds/x13sav-lvds_user-manual_1404152088.webp)
Super X13SAV-LVDS User's Manual
88
SATA And RST Configuration
SATA Controller(s)
Use this feature to enable or disable the onboard SATA controller supported by the Intel PCH
chip. The options are
Enabled
and Disabled.
Storage Option ROM/UEFI Driver
Select UEFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Do not Launch and
EFI
.
Aggressive LPM Support
When this feature is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods of
I/O inactivity and will return the link to an active state when I/O activity resumes. The options
are Disabled and
Enabled
.
OCulink PCIe/SATA1 - OCulink PCIe/SATA4, I-SATA4
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Software Preserve Support
Hot Plug
Set this feature to Enable for hot plug support, which allows you to replace a SATA drive
without shutting down the system. The options are Disabled and
Enabled
.
Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled
and Enabled.
SATA Device Type
Use this feature to specify if the SATA port should be connected to a Solid State Drive or
a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State Drive.
VMD Setup Menu
VMD Configuration
Enable VMD Controller
Use this feature to enable or disable the VMD controller. The options are
Disabled
and
Enabled.