Chapter 4: UEFI BIOS
93
PCIe/PCI/PnP Configuration
SLOT1 PCI 33MHz OPROM
PCH SLOT2 PCI-E 3.0 X4 OPROM
PCH SLOT4 PCI-E 5.0 X8 (IN x16) OPROM
CPU SLOT5 PCI-E 3.0 X4 OPROM
CPU SLOT7 PCI-E 5.0 X16 OPROM
PCI-E M.2-M1 OPROM
PCI-E M.2-M2 OPROM
PCI-E M.2-M3 OPROM
Onboard LAN1 Option ROM
Select Disabled to deactivate the selected slot or EFI to activate the slot in UEFI mode.
The options are Disabled and
EFI
.
SATA And RST Configuration
SATA And RST Configuration
SATA Controller(s)
This feature enables SATA device(s). The options are Disabled and
Enabled
.
*If this feature is set to Enabled, the following features will become available for
configuration:
Storage Option ROM/UEFI Driver
This feature controls the execution of UEFI and legacy storage OpROM. The options are Do
not launch and
EFI
.
Aggressive LPM Support
This feature enables the PCH to aggressively enter link power state. The options are
Disabled and
Enabled
.
SATA Port0~7
Software Preserve
Hot Plug
This feature designates the port specified for hot plugging. Set the setting to Enabled for
hot-plugging support, which will allow you to replace a SATA disk drive without shutting
down the system. The options are Disabled and
Enabled
.
