56
Super X13SAE/X13SAE-F User's Manual
2.9 Jumper Settings
How Jumpers Work
To modify the operation of the motherboard, jumpers can be used to choose between optional
settings. Jumpers create shorts between two pins to change the function of the connector.
Pin 1 is identified with a square solder pad on the printed circuit board. Refer to the diagram
below for an example of jumping pins 1 and 2. Refer to the motherboard layout page for
jumper locations.
Note:
On two-pin jumpers, "Closed" means the jumper is on and "Open" means the
jumper is off the pins.
Connector Pins
Connector Pins with a Jumper
installed on Pins 1 and 2
Top View
LAN Enable/Disable
JPL1 and JPL2 will enable or disable the LAN1 and LAN2
ports on the motherboard. Refer to the table on the right
for jumper settings. The default setting is Enabled.
1. LAN1 Enable/Disable
2. LAN2 Enable/Disable
LAN1/LAN2 Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled (Default)
Pins 2-3
Disabled
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (3.2 (20Gb))
USB4/5 (3.2 (5Gb)) USB6 (3.2 (5Gb))
LED4
BMC_HB_LED
UID
DP
HDMI
VGA
DVI
IPMI_LAN
USB0/1
LAN1
USB7
(3.2 (10Gb))
USB10
(3.2 (20Gb))
LAN2
USB8/9
(3.2 (10Gb))
JPL2
JPAC1
PCI-E M.2-M2
PCI-E M.2-M3
PCI-E M.2-M1
JPW1
CPU SLOT7 PCI-E 5.0 X16
CPU SLOT4 PCI-E 5.0 X8 (IN x16)
PCH SLOT5 PCI-E 3.0 X4
PCH SLOT2 PCI-E 3.0 X4
SLOT1 PCI 33MHZ
BMC
BT1
MAC CODE
BMC CODE
BAR CODE
MAC CODE
BIOS LICENSE
X13SAE-F
DESIGNED IN USA
REV:1.00
JPME2
JLED1
JD1
JPG1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JWD1
PWR_LED
CATERR_LED
JSTBY1
JL1
JSD1
SYS_F
AN3
SYS_FAN2
SYS_FAN1
CPU_FAN2
CPU_FAN1
JPW2
12V_PUMP_PWR1
AUDIO_FP
COM1
USB2/3
JTPM1
SP1
JF1
JBT1
JPI2C1
PCH
AUDIO
JPL1
2
1
