manualshive.com logo in svg

Supermicro X12SCQ, User Manual, Page: 83 / 128

Share
Download
Supermicro X12SCQ User Manual Download Page 83

Chapter 4: BIOS

83

DNS addresses

Interface ID

This feature shows the interface ID for the specified network device. 

DAD Transmit Count

This feature sends Neighbor Solicitation messages while performing a Duplicate Address 
Detection (DAD) to make sure there is no IP address duplication. A value of zero means 
a DAD has not been performed.

Policy

Use this feature to select an automatic or manual policy. The options are 

Automatic

 

and Manual. 

Save Changes And Exit

When you have completed the changes for this section, select this option to save all 
changes made and exit. 

PCH-FW Configuration

The following firmware information will display:

ME Firmware Version

ME Firmware Mode

ME Firmware SKU

ME FW Image Re-Flash

Use this feature to update the Management Engine firmware. The options are Enabled and 

Disabled

.

AMT Configuration

USB Provisioning of AMT

Use this feature to enable or disable USB provisioning. The options are 

Disabled

 and 

Enabled. 

Summary of Contents for X12SCQ

































































































































Reviews:

No comments