13
Chapter 1: Introduction
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting
JAT1
ATX/AT mode
Pins 1-2 (ATX mode)
JBT1
CMOS Clear
Open (Normal)
JI
2
C1/JI
2
C2
SMB to PCI-E Slots Enable/Disable
Pins 2-3 (Disabled)
JPAC1
Audio Enable
Pins 1-2 (Enabled)
JPL1/JPL2
LAN1/2 Enable/Disable (JPL2 on X11SSQ/-V only)
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode
Pins 1-2 (Normal)
JWD1
Watch Dog
Pins 1-2 (Reset)
LED
Description
Status
CATERR_LED
Catastrophic Error LED
Orange: CAT Error
LED1
Power LED
Green: Power On
LED3
Standby Power LED
Green: Power On
Connector
Description
AUDIO FP
Audio Front Panel Header
B3
Onboard Battery
COM1 ~ COM4
COM Headers (COM3/COM4 on X11SSQ/-V only)
DVI-D
Digital Video Interface Port (Back Panel)
FAN1 ~ FAN4
System/CPU Fan Headers (FAN1: CPU Fan)
HD Audio
High Definition Audio Connector (Back Panel)
HDMI/DP
High Definition Multimedia Interface/DisplayPort Connector (Back Panel)
I-SATA0 ~ I-SATA5
Intel® SATA 3.0 Ports (I-SATA0 supports SuperDOM) (I-SATA4/5 on X11SSQ/-V only)
I-SGPIO1/I-SGPIO2
Serial General Purpose I/O Headers for SATA (X11SSQ/-V only)
J18
Embedded DisplayPort (eDP) (X11SSQ only)
J23
M.2 Connector (X11SSQ/-V only)
JD1
Speaker/Buzzer Header (Pins 1-4: Speaker, Pins 3-4: Buzzer)
JF1
Front Control Panel Header
JL1
Chassis Intrusion Header
JLED1
3-Pin Power LED
JP7
General Purpose I/O Header (X11SSQ/-V only)
JPW1
24-pin ATX Main Power Connector (Required)
JPW2
+12V 4-pin CPU Power Connector (Required)
JSD1
SATA DOM Power Connector
JSMB1
SMBus Header
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
KB/Mouse
Keyboard/Mouse Connector (Back Panel)
LAN1/LAN2
LAN (RJ45) Ports (LAN2 on X11SSQ/-V only)
