16
X11SSN-H/-E/-L User's Manual
Quick Reference Table
Jumper
Description
Jumper Setting (Default *)
JLCDPWR1
LVDS Panel VCC power source selection
Pin 1-3* (3.3V)
Pin 3-5 (5V)
Pin 3-4 (12V)
JPF1
FORCE POWER ON
Pin 1-2* (FORCE POWER ON)
Pin 2-3 (POWER BUTTON ON)
JPME2
Manufacturing Mode
Pin 1-2* (Normal)
Pin 2-3 (Manufacturing)
JPT1
TPM Enable/Disable Header
(X11SSN-L does not support TPM)
Pin 1-2* (Enable)
Pin 2-3 (Disable)
Connector
Description
AUDIO FP
Front Panel Audio Header (Mic-In/Headphone-Out)
BT1
Battery Connector
(To Clear CMOS, remove the battery, short pins 1-2 for more than 10 seconds and
install the battery.)
DP++
DisplayPort
FAN1
System Fan Header
I-SATA1
SATA 3.0 Port
JCOM1: COM1/COM2
JCOM2: COM3/COM4
COM Headers
(JCOM1 supports two RS232/RS422/RS485, JCOM2 supports two RS232)
JD1
Speaker Header (Pins 1-4)
JF1
Front Control Panel Header (Power/HDD LED, Reset, Power button)
JGP1
8-bit General Purpose I/O Header
JHDMI1
Back Panel HDMI 2.0 Port
JMD1
M.2 Slot B-KEY 2280/2242/3042 (PCIe x2 Gen3, one USB 2.0, one SATA 3.0)
(2242/3042 modules are supported by the optional copper standoff, P/N: MCP-110-
00098-0N)
JMP1
Full Size Mini PCI-E Slot with mSATA (one PCIe x1 Gen3, one USB 2.0, one SATA 3.0)
JPH1
SATA Power Connector (for one HDD system)
JPW1
4-pin 12V R/A Type Power Connector (for X11SSN-H/E/L and X11SSN-H/E/L-WOHS)
JPW2
4-pin 12V Vertical Type Power Connector (for X11SSN-H/E/L-VDC)
JSMBUS1
System Management Bus Header
LAN1, LAN2
LAN (RJ45) Ports
LVDS1
Dual Channel 48-bit LVDS Connector
SRW1 - SRW4
M.2 and Mini PCI-E Mounting Holes
USB0/1
USB 2.0 x 2 Header
USB2/3
USB 2.0 x 2 Header
USB4/5
Back Panel USB 3.0 Ports
USB6
USB 3.1 Type C Port
USB7
USB 3.0 OTG Header (one USB 3.0, one USB 2.0)