Chapter 4: BIOS
83
Storage Option ROM/UEFI Driver
This feature controls which option ROM to execute for the storage device. The options are
Disabled
, EFI, and Legacy.
Serial ATA Port 0~7
This item displays the information detected on the installed SATA drive on the particular SATA
port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0~7 Hot Plug
Set this item to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
Port 0~7 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to initialize the device. The
options are
Disabled
and Enabled.
Port 0~7 SATA Device Type
Use this item to specify if the SATA port specified by the user should be connected to a Solid
State drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State Drive.
Trusted Computing
The X11SRM-F/-VF supports TPM 1.2 and 2.0. The following Trusted Platform Module (TPM)
information will display if a
TPM 2.0 module is detected:
•
Vendor Name
•
Firmware Version
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM (Trusted Platform Module) support to enhance data
integrity and network security. Please reboot the system for a change on this setting to take
effect. The options are Disable and
Enable
.
•
Active PCR Bank
•
SHA256 PCR Bank
*If the item above is set to Enable, "SHA-1 PCR Bank" and "SHA256 PCR Bank" will
become available for configuration:
