13
Chapter 1: Introduction
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open (Normal)
JPB1
BMC Enable/Disable
Pins 1-2 (Enabled)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPL1, JPL2
LAN1/LAN2 Enable/Disable
Pins 1-2 (Enabled)
JPME2
ME Manufacturing Mode
Pins 1-2 (Normal)
JPUSB1
USB 0/1 Wake Up
Pins 1-2 (Enabled)
JWD1
Watchdog Timer
Pins 1-2 (Reset)
LED
Description
Status
LED6301
BMC Heartbeat LED
Blinking Green: BMC Normal
LED6904
M.2 LED
Blinking Green: Device Working
LED7201
Onboard Power LED
Solid Green: Power On
UID-LED
Unit Identifier (UID) LED
Solid Blue: Unit Identified
Connector
Description
B2
Onboard Battery
COM1, COM2
COM Port, COM Header
FAN1 ~ FAN4, FANA, FANB
CPU/System Fan Headers
IPMI_LAN
Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA7
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SGPIO1, I-SGPIO2
Serial Link General Purpose I/O Connection Headers
JD1
Speaker/Power LED Indicator (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1
Front Control Panel Header
JIPMB1
4-pin BMC External I
2
C Header (for an IPMI card)
JL1
Chassis Intrusion Header
JNVME0~3
NVM Express (NVMe) PCI-Express 3.0 x4
Connectors (-VF only)
JNVI
2
C1
NVMe I
2
C Header
JOH1
Overheat LED Indicator
JPI
2
C1
Power System Management Bus (SMB) I
2
C Header
JPW1
24-pin ATX Power Connector
JPWR2
8-pin 12V CPU Power Connector
JRK1
Intel RAID Key Header
JSD1, JSD2
SATA DOM Power Connectors
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
JUIDB1
Unit Identifier (UID) Switch
