20
Super X11SRi-IF User's Manual
Chapter 2
Installation
2.1 Before the Installation
Be sure to read the precautions below carefully before assembling the motherboard and
components.
1. The location of the M.2 slot is on the bottom side of the motherboard. To prevent the
M.2 slot and the installed device from hitting the chassis, keep a 5.5mm clearance from
the bottom side of the motherboard and the chassis.
2. To support all the features of this motherboard, use a power supply unit with a least
500W. To support a double width add-on card on the motherboard, use a power supply
unit with at least 700W.
3. The power of this motherboard is supplied by a 12V DC-in directly. Short a wire from
PS-ON# to GND on ATX-24Pin cable plug if using an ATX power supply unit.
4. Refer to
Section 2.7 Front Control Panel
for detailed PIN definition.
5.
The devices of SATA or NVMe can be extended via a specific Supermicro cable. Refer
to the table below and contact Supuermicro for more detailed information.
Cable List
Description
Part Number
SATA cable
CBL-SAST-0933 (for 4x SATA drive expansion)
CBL-SAST-0886 (for SATA power connection)
NVMe extension cable
CBL-SAST-0956
