31
Chapter 2: Installation
MAC CODE
BIOS
LICENSE
DESIGNED IN USA
X11SAE-M
REV: 1.01
BAR CODE
S1
BIOS RESTORE
JF1
JPW2
JPW1
SP1
B3
JD1
JBT1
JTBT1
JSD1
JTPM1
JL1
JSTBY1
COM1
I-SA
TA3
I-SA
TA2
I-SA
TA7
I-SA
TA6
I-SA
TA1
I-SA
TA5
I-SA
TA0
I-SA
TA4
I-SGPIO1
I-SGPIO2
J23
LED3
LED1
FAN2
FAN1
FAN4
FAN5
JPME2
JP
AC1
JWD1
JI2C1 JI2C2
JLED1
JPL2
JPL1
JVR1
MH12
MH9
MH10
MH11
FAN3
PCH
C236
SIO
BIOS
USB8/9(3.0)
USB10/11(3.0)
USB2/3
USB4/5
AUDIO FP
SLOT5 PCI 33MHz
PCH SLOT4 PCI-E 3.0 X4
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
M.2 PCI-E 3.0 X4
USB0/1
LAN2
USB6/7(3.0)
LAN1
HDMI/DP
DVI-D
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CPU F
AN
USB12/13(3.1)
CPU Socket LGA 1151
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMB2, DIMMA2, then DIMMB1,
DIMMA1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Align the DIMM module key with the
receptive point on the single-latch DIMM
slot.
3. Push the release tab outwards to unlock
the slot.
4. Align the notch on the end of the module
against the receptive point on the end of
the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Push the release tab to the lock position to
secure the module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Release Tab
Notch
Press both notches
straight down into
the memory slot.
Receptive Point
Module Key
