Chapter 4: BIOS
87
4. To map the USB flash drive, type the following command at the Shell prompt:
fs0:
USB flash drive names will vary depending on how many hard drives are connected to the
system.
5. Type
ls
to show the contents of the flash drive.
6. Type
cd A2SAV
to change to the A2SAV directory. Directory names may differ depending
on firmware versions.
7. Type
cd Marvell firmware
.
8. Type
cd A2SAV_U35_88SE9230_1.1.
9. Type
cd firmware
.
10. Type
go y
and press enter to update the firmware. A "Write file is successful" message
will display when the update is complete. Reboot the system for the changes to take effect.
