manualshive.com logo in svg

Supermicro X11DPL-i-B, User Manual, Page: 101 / 127

Share
Download
Supermicro X11DPL-i-B User Manual Download Page 101

Chapter 4: UEFI BIOS

101

When a TPM (Trusted-Platform Module) device is detected in your machine, the following 
information will be displayed.

• 

Security Device Support

• 

No Security Device Found

Security Device Support

If this feature and the TPM jumper (JPT1) on the motherboard are both enabled, the onboard 
security (TPM) device will be enabled in the BIOS to enhance data integrity and system 

security. Please note that the OS will not show the security device. Neither TCG EFI  protocol 

nor INT1A interaction will be made available for use. If you have made changes on the setting 
on this feature, be sure to reboot the system for the change to take effect. The options are 
Disable and 

Enable

. 

HTTP BOOT Configuration Settings

Use this feature to confi gure HTTP Boot settings for your system.

HTTP Boot One Time

If this feature is set to Enabled, the system will automatically boot into the HttpBoot setting 

that has been previously configured when it was powered up the fi rst time. The options are 

Enabled and 

Disabled

.

Input the Description 

This feature allows the user to input the description of the boot.

Boot URI

This feature allows the user to boot the system from a network connection.

Trusted Computing (Available when a TPM device is installed 

and detected by the BIOS)

Summary of Contents for X11DPL-i-B
































































































































Reviews:

No comments