Supermicro X10SRM-F, User Manual

Page: 17 / 126

17
Chapter 1: Introduction
Note:
The table above is continued on the next page.
Motherboard Features
I/O Devices
•
Serial (COM) Port
•
One (1) serial port on the rear I/O panel (COM1)
•
One (1) front accessible serial port header (COM2)
•
SATA 3.0
•
Six (6) SATA 3.0 ports supported by Intel PCH (I-SATA 0-5)
•
Four (4) SATA 3.0 ports via I-PASS connector (JS1)
•
I-SATA4 & I-SATA5 are SuperDOM connectors
•
RAID (PCH)
•
RAID 0, 1, 10
•
Video (VGA) Port
•
One (1) VGA connection on the rear I/O panel
Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB6/7)
•
Two (2) front accessible USB 2.0 headers with two (2) USB connections (USB2/3, USB4/5)
•
One (1) front accessible USB 3.0 header with two (2) USB connections (USB8/9)
•
One (1) Type-A USB 3.0 header (USB10)
BIOS
•
128Mb AMI BIOS
®
SPI Flash BIOS
•
ACPI 3.0 or later, Plug and Play (PnP), BIOS rescue hot-key, Riser Card auto detection support, Dual Boot_Block support,
and SMBIOS 2.7 or later
Power Management
•
ACPI power management
•
SuperDoctor® 5
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V stdby, +5V stdby, VBAT, HT, memory, PCH temperature,
system temperature, and memory temperature
•
CPU 5-phase switching voltage regulator
•
CPU thermal trip support
•
PECI/TSI
Fan Control
•
Low-noise fan speed control
System Management
•
IPMIView, SMCIPMITOOL, IPMICFG
•
SPM, SUM In-Band, SUM-OOB
•
SuperDoctor® 5
•
Chassis intrusion header and detection
•
Server Platform Service
•
Silicon enabling
•
Single cooling zone