X10SDE-DF User's Manual
56
PCI PERR/SERR Support
Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI Bus Signal
Error Event. The options are
Disabled
and Enabled.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Disabled
and Enabled.
Maximum Payload
Use this feature to select the setting for the PCI Express maximum payload size. The options
are
Auto
, 128 Bytes, and 256 Bytes.
Relaxed Ordering
Select Enable to enable Relaxed Ordering support which will allow certain transactions to
violate the strict-ordering rules of PCI bus for a transaction to be completed prior to other
transactions that have already been enqueued. The options are
Disabled
and Enabled.
Extended Tag
Use this item to allow a device to use the 8-bit tag field as a requester. The options are
Disabled
and Enabled.
ARI Forwarding
When this feature is enabled, the Downstream Port disables its traditional device number to
0 when turning Type1 Configuration Request into a Type0 Configuration Request. The default
value is
Disabled
.
ASPM Support
Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
configuration. Select Disabled to disable ASPM support. The options are
Disabled
and Auto.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specified by the user. The options are
Legacy
and EFI.
P1 Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot. The
default setting for LAN1 Option ROM is
PXE
. The options are Disabled,
PXE
, and iSCSI.
P1 Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port2 used for system boot. The
default setting for LAN2 Option ROM is
Disabled
.
