2-26
X10DGQ Motherboard User’s Manual
IPMI CODE
BAR CODE
X10DGQ
Rev. 1.00
2-8 Jumper Settings
Explanation of Jumpers
To modify the operation of the motherboard,
jumpers can be used to choose between
optional settings. Jumpers create shorts be-
tween two pins to change the function of the
connector. Pin 1 is identified with a square
solder pad on the printed circuit board. See
the motherboard layout pages for jumper
locations.
Note:
On t wo pin jumpers,
"Closed" means the jumper is on
and "Open" means the jumper is
off the pins.
Connector
Pins
Jumper
Cap
Setting
Pin 1-2 short
3 2 1
3 2 1
A. ME Mode Select
A
Manufacturer Mode Select
Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force
the system to operate in the Manufac-
turer mode, allowing the user to flash
the system firmware from a host server
for system setting modifications. See the
table on the right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting Definition
1-2
Normal (Default)
2-3
Manufacturer Mode
