Supermicro SuperWorkstation 5038A-I, User Manual

Page: 64 / 84

S
uper
W
orkstation 5038A-I User's Manual
BIOS
7-33 7-32
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will
be claimed by the EHCI driver. The settings are Enabled and Disabled .
XHCI Mode
This feature handles the operation mode for the XHCI (Extensible Host Controller
Interface) controller. The settings are Smart Auto , Auto, Enabled, and Disabledl.
EHCI1
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #1 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled .
EHCI2
Select Enabled to enable EHCI (Enhanced Host Controller Interface) support on
USB 2.0 connector #2 (-at least one USB 2.0 connector should be enabled for EHCI
support.) The options are Disabled and Enabled .
PCH-FW (Firmware)
The following information for the PCH Firmware.
•
ME FW Version - displays the Management Engine version number.
•
ME Firmware Mode - displays the Management Engine mode.
•
ME Firmware Type
- displays the Management Engine irmware type.
•
ME Firmware SKU - displays the Management Engine SKU size.
ME FW Image Re-Flash
This item will update the PCH Firmware from an omage in a USB Flashdrive at-
tached to a USB port. The options are Enabled and Disabled. This feature is
supported on the X10SRA only.