Supermicro SuperWorkstation 5037A-iL-MA015, User Manual

Page: 20 / 48

3-2
S
uper
W
orkstation 5037A-iL-MA015 User's Manual
Figure 3-1. Removing the Side Covers
1
3
1
6
2
2
1
5
Caution: Except for short periods of time, do NOT operate the system without the
cover in place. The chassis cover must be in place to allow for proper airfl ow and
to prevent overheating.
Additional warnings and cautions can be found on the Supermicro Web site at http://
www.supermicro.com/about/policies/safety_information.cfm.
3-3 Adding PCI Add-On Cards
The 5037A-iL-MA015 can accommodate standard size add-on cards populated in
all slots.
Installing an Add-on Card
1. Begin by removing power from the system as described on page 3-1.
2. Removethe PCI slot shield for the slot you wish to populate.
3. Fully seat the card into the card slot, pushing down with your thumbs evenly
on both sides of the card.
4. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the motherboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.