manualshive.com logo in svg

Supermicro SuperStorageSystem SSG-2028R-DN2R40L, User Manual

Share
Download
Supermicro SuperStorageSystem SSG-2028R-DN2R40L User Manual Download Page 81

B-4

SUPERSTORAGESYSTEM SSG-2028R-DN2R40L User's Manual

Notes

(continued from front)

The products sold by Supermicro are not intended for and will not be used in life support systems, 

medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com-

munication devices or other critical systems whose failure to perform be reasonably expected to 

result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro dis

-

claims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous 

applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend 

and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and 

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Summary of Contents for SuperStorageSystem SSG-2028R-DN2R40L





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands