Supermicro SuperStorage Server 2028R-NR48N User Manual Download Page 142

Page: 142 / 146

B-4

SuperStorage Server

2028R-NR48N

6. After the process of BIOS recovery is completed, press any key to reboot the

system.

Using a different system, extract the BIOS package into a bootable USB flash

drive.

8. When a DOS prompt appears, enter FLASH.BAT BIOSname.### at the prompt.

Note:

Do not interrupt this process

until BIOS flashing is completed.

9. After seeing the message that BIOS update is completed, unplug the AC power

cable from the power supply to clear the CMOS, and then plug the AC power
cable in the power supply again to power on the system.

10. Press <Del> continuously to enter the BIOS Setup utility.

11. Press <F3> to load default settings.

12. After loading default settings, press <F4> to save the settings and exit the BIOS

Setup utility.

Summary of Contents for SuperStorage Server 2028R-NR48N



















































































































































Search results

Summary of Contents for SuperStorage Server 2028R-NR48N

Reviews:

Related manuals for SuperStorage Server 2028R-NR48N

Brands by name

Popular brands

Supermicro SuperStorage Server 2028R-NR48N, User Manual

Search results

Summary of Contents for SuperStorage Server 2028R-NR48N

Reviews:

Related manuals for SuperStorage Server 2028R-NR48N

Brands by name

Popular brands