Supermicro SuperServer SYS-E102-9AP-LN4-C User Manual Download Page 21

Page: 21 / 81

Chapter 3: Maintenance and Component Installation

Figure 3-1. Removing the Chassis Cover

3.2 Accessing the System

The CSE-E102TF chassis features a removable top cover, which allows easy access to the
inside of the chassis.

Removing the Top Cover

1. On the chassis rear, remove the two screws.

2. Slide the cover to the rear as illustrated above to release the cover hooks from the

chassis, and lift the cover off.

Caution:

Except for short periods of time, do not operate the server without the cover in place.

The chassis cover must be in place to allow for proper airflow and to prevent overheating.

Cover Hooks

Screws

Cover Hooks

Summary of Contents for SuperServer SYS-E102-9AP-LN4-C


















































































Search results

Summary of Contents for SuperServer SYS-E102-9AP-LN4-C

Reviews:

Related manuals for SuperServer SYS-E102-9AP-LN4-C

Brands by name

Popular brands

Supermicro SuperServer SYS-E102-9AP-LN4-C, User Manual

Search results

Summary of Contents for SuperServer SYS-E102-9AP-LN4-C

Reviews:

Related manuals for SuperServer SYS-E102-9AP-LN4-C

Brands by name

Popular brands