49
Chapter 3: Maintenance and Component Installation
Figure 3-6. Removing the Dummy Drive from a Carrier
Installing a Drive
1. Remove the dummy drive, which comes pre-installed in the drive carrier, by removing
the screws securing the dummy drive to the carrier. These screws are not used to
mount the actual drive.
Dummy Drive
Hard Drive
Carrier
Removing a Hot-Swap Drive Carrier from the Chassis
1. Press the release button on the drive carrier, which will extend the drive carrier handle.
2. Use the drive carrier handle to pull the drive out of the chassis.
Figure 3-5. Removing a Drive Carrier
1
2
