55
Chapter 5: BIOS
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirection. Make
sure that the same speed is used in the host computer and the client computer. A lower
transmission speed may be required for long and busy lines. The options are 9600, 19200,
57600, and
115200
(bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The
options are
None,
Hardware RTS/CTS, and Software Xon/Xoff.
Data Bits
Parity
Stop Bits
PCIe/PCI/PnP Configuration
PCI Bus Driver Version A5.01.08
PCI Devices Common Settings:
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space, if 64bit PCI
decoding is supported by the system. The options are
Disabled
and Enabled.
Mini PCIe OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and
EFI
.
M.2 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and
EFI
.
Onboard LAN Option ROM Type
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled and
EFI
.
Onboard Video Option ROM
Use this feature to select which onboard video firmware type to be loaded. The options are
Disabled and
EFI
.
