SuperServer E403-9P-FN2T User's Manual
88
Super IO Configuration
The following Super IO information will display:
•
Super IO Chip AST2500
Serial Port 1 Configuration
This submenu allows the user to configure the settings of Serial Port 1.
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled
.
Device Settings
This item displays the status of a serial part specified by the user.
Serial Port 1 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 1 are
Auto
, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4), (IO=3E8h;
IRQ=4;), and (IO=2E8h; IRQ=4).
Serial Port 2 Configuration
This submenu allows the user the configure settings of Serial Port 2.
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled
.
Device Settings
This item displays the status of a serial part specified by the user.
Serial Port 2 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select
Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are
Auto
, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3), (IO=3E8h;
IRQ=3), and (IO=2E8h; IRQ=3).
Serial Port 2 Attribute (Available for Serial Port 2 only)
Select SOL to use COM Port 2 as a Serial Over LAN (SOL) port for console redirection.
The options are
SOL
and COM.
