3-4
SuperServer E100-8Q User's Manual
Installing an Antenna
1. For each antenna port, verify that you have the correct antenna type. The dual
band antenna is distinguished by two grooves in the screw-on cap (Figure 3-5).
The 3G antenna cap has a single groove.
2. Screw the antenna onto the proper antenna jack on the front or rear of the
chassis (Figure 3-7).
3. Orient the antenna to vertical for best performance. You can swivel the antenna
at the pivot joint, and, if necessary, rotate the antenna cap to make the antenna
vertical.
Figure 3-7. Sample Antenna Port Configurations
WiFi
Zigbee
WiFi
WiFi
Zigbee
Zigbee
3G
3G
3G
Configured for Two Radio Modules
Configured for a Single Radio Module
Chassis Front
(with Supermicro
logo)
Chassis Rear
