Supermicro SUPERSERVER 8046B-TRLF, User Manual

Page: 40 / 110

5-6
S
UPER
S
ERVER 8046B-TRLF User's Manual
Warning: Make sure you lift the lever completely when installing the CPU;
otherwise, damage to the socket or CPU may occur.
!
!
Align the CPU key (a semi-circle cutout) against the socket key, which is the 5.
notch below the gold color dot on the side of the socket.
Align pin 1 on the CPU with pin 1 on the CPU socket. 6.
Once both the CPU and the socket are aligned, carefully lower the CPU 7.
straight down into the socket. To avoid damaging the CPU or the socket, do
not rub the CPU against the surface of the socket or the pins.
With the CPU inside the socket, inspect the four corners of the CPU to make 8.
sure that the CPU is properly and fully installed.
Lower the CPU load plate to the socket. 9.
Use your thumb to gently push the socket clip down to the clip lock. 10.
Warning: Save the plastic cap. The serverboard must be shipped with
the plastic cap properly installed to protect the CPU socket pins. Ship-
ment without the plastic cap properly installed may cause damage to the
socket pins.
CPU Pin 1