Supermicro SUPERSERVER 8046B-TRLF, User Manual

Page: 20 / 110

2-6
S
UPER
S
ERVER 8046B-TRLF User's Manual
Figure 2-2. Identifying the Inner Rails and Chassis Handles
Chassis Handle
Inner Rails
Chassis Handle
Screw
Chassis Rail
Screw
1 1
1 1
1
1
Locate the inner rails (2) and screws (12) in the shipping package. 4.
Align the inner rails against the chassis, as shown. Confi rm that the rails are 5.
fl ushed against the edge of the chassis.
Tighten the screws. Do not over tighten. 6.
Repeat steps 5 and 6 with the other inner rail. 7.
Installing the Outer Rails to the Rack
Attach the front and rear short brackets to the outside of the long bracket. 1.
Both bracket ends must face the same direction.
Adjust both the brackets to the proper distance so that the rail fi ts snugly into 2.
the rack.
Secure the front side of the outer rail with two M5 screws and the rear side 3.
of the outer rail with three M5 screws. Note: The outer rail is adjustable from
approximately 26" to 38.25".
Repeat steps 1-3 for the left outer rail. 4.