68
Chapter 4: Motherboard Connections
LAN Port Enable/Disable
Jumper JPL1 allows the user to enable the onboard LAN Port1/LAN Port2. The default setting
is pins 1-2 to enable the connection. Refer to the table below for jumper settings.
LAN Enable/Disable
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Enabled
Pins 2-3
Disabled
ME Recovery
JPME1 is used for ME Firmware Recovery mode, which will limit system resource for essential
function use only without putting restrictions on power use. In the single operation mode,
online upgrade will be available via Recovery mode. See the table below for pin definitions.
ME Recovery
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal (Default)
Pins 2-3
ME Recovery
