SuperServer 6029TR-HTR User's Manual
48
Figure 3-13. Installing an Add-On Card
Expansion Card/Expansion Slot
The 6029TR-HTR includes one preinstalled riser card per node, designed specifically for use
in a 2U rackmount chassis. This riser card (RSC-R1UTP-E16R) supports one low-profile PCI
Express x16 card for each node.
Installing the Riser Card onto the Riser Card Bracket
1.
Disconnect the power supply and lay the chassis on a flat surface.
2. Pull the serverboard node drawer from the chassis.
3. Remove the riser card bracket.
3a. Remove the screw securing the riser card bracket to the back of the drawer.
3b. Lift the bracket out of the serverboard node drawer.
4.
Align the riser card mounting hole to the bracket standoff and secure the riser card to
the bracket using the two screws included in the accessory box.