manualshive.com logo in svg

Supermicro SuperServer 6029TR-HTR, User Manual, Page: 146 / 149

Share
Download
Supermicro SuperServer 6029TR-HTR User Manual Download Page 146

SuperServer 6029TR-HTR User's Manual

146

For  the  changes  to  take  effect,  press 

<F4> 

to save the settings and exit the BIOS Setup 

utility. Then, press 

<Del>

 key continuously during system boot to enter the BIOS Setup utility. 

Navigate to the Advanced tab. The item(s) for onboard Intel® LAN device(s) will become 

available for configuration as shown below. 

Note :

 If Onboard LAN1 Option ROM is set to EFI, all items for onboard LAN option 

ROM will be set to EFI by the EFI driver. Additionally, these items will become unavail-
able except Onboard LAN1 Option ROM.

Onboard LAN1 Option ROM (available when NIC(s) is(are) detected by the system)

Use the arrow keys to select Onboard LAN1 Option ROM and press 

<Enter>

. The options 

are Disabled, 

Legacy

, and EFI. Set this item to EFI.

Summary of Contents for SuperServer 6029TR-HTR






















































































































































Reviews:

No comments