SuperServer 6029TR-DTR User's Manual
80
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and
Enabled
.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Disabled
and Enabled.
MMIO High Base
Use this item to select the base memory size according to memory-address mapping for the
IO hub. The options are
56T
, 40T, 24T, 16T, 4T, 2T, and 1T.
MMIO High Granularity Size
Use this item to select the high memory size according to memory-address mapping for the
IO hub. The options are 1G, 4G, 16G, 64G,
256G
, and 1024G.
Maximum Read Request
Select Auto for the system BIOS to automatically set the maximum size for a read request
for a PCI-E device to enhance system performance. The options are
Auto
, 128 Bytes, 256
Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
Use this item to select the low base address for PCIE adapters to increase base memory.
The options are 1G, 1.5G, 1.75G,
2G
, 2.25G. and 3G.
NVMe Firmware Source
Use this item to select the NVMe firmware to support booting. The options are
Vendor De-
fined Firmware
and AMI Native Support. The default option,
Vendor Defined Firmware
, is
pre-installed on the drive and may resolve errata or enable innovative functions for the drive.
The other option, AMI Native Support, is offered by the BIOS with a generic method.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are
Onboard
and Offboard.
Note 1
: The three items below are available when the device is detected by the system.
Note 2:
The three items below display depending on the device being installed in and
detected by the system.
RSC-T2R-884
RSC-T2R-884 SLOT1 PCI-E 3.0 X8 OPROM
