Supermicro SUPERSERVER 6022L-6, User Manual

Page: 42 / 112

5-8
S
UPERSERVER 6022L-6 User’s Manual
Figure 5-5b. Top View of DIMM Slot
Figure 5-5a. Side View of DIMM Installation into Slot
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the notch on the bottom of the module.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Memory Support
The P4DLR only supports ECC registered PC1600 (DDR-200) SDRAM
memory. An interleaved memory configuration is used (see step 1).
PC2100 memory is supported but only at 200 MHz (PC1600 speed). PC100/
133 SDRAM is not supported. It is highly recommended that you do not mix
memory modules of different sizes and speeds.
See Figures 5-5a and 5-5b on the following page for installing and removing
memory modules.