Supermicro SUPERSERVER 6012P-i, User Manual

Page: 53 / 102

Chapter 5: Advanced Motherboard Setup
5-19
LAN1/LAN2 Enable/Disable
Change the setting of jumper JD4
to enable or disable both onboard
LAN ports on the motherboard.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings. The default set-
ting is pins 1-2.
Jum per
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN1/LAN2
Enable/Disable
Jumper Settings
(JD4)
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enable/Disable
Jumper Settings
(JP4)
3rd Power Supply Alarm
Enable/Disable
The system will notify you in the
event of a power supply failure.
This feature assumes that three
power supply units are installed in
the chassis, with one acting as a
backup. If you only have one or
two power supply units installed,
you should disable this (the default
setting) with JP9 to prevent false
alarms. See the table on the right
for jumper settings.
Jumper
Position
O pen
Closed
Definition
Disabled
Enabled
Pow er Supply
Alarm Enable/Disable
Jum per Settings (JP9)