Supermicro SUPERSERVER 6012P-8, User Manual

Page: 52 / 104

5-18
S
UPERSERVER 6012P-8 User’s Manual
SCSI Enable/Disable
The SCSI Termination jumper at
JP22 allows you to enable or dis-
able the onboard SCSI controller.
The normal (default) position is on
pins 1-2 to enable SCSI termina-
tion. See the table on the right for
jumper settings.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
S C S I E n a b le /D is a b le
J u m p e r S e tting s
(J P 2 2 )
LAN1 Enable/Disable
Change the setting of jumper JP3
to enable or disable the onboard
LAN1 or NIC (Network Interface
Card) on the motherboard. See
the table on the right for jumper
settings. The default setting is
enabled
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
L A N 1 (N IC )
E n a b le /D is a b le
J u m p e r S e tting s
(J P 3 )
LAN2 Enable/Disable
Change the setting of jumper JP27
to enable or disable the onboard
LAN2 or NIC (Network Interface
Card) on the motherboard. See
the table on the right for jumper
settings. The default setting is
enabled.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
L A N 2 (N IC )
E n a b le /D is a b le
J u m p e r S e tting s
(J P 2 7 )
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings.
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
E n a b le d
D isa b le d
V G A E n a b le /D is a b le
J u m p e r S e tting s
(J P 4 )