Supermicro SUPERSERVER 6011H, User Manual, Page: 88 / 112

7-18
SUPERSERVER 6011H User's Manual
7-6 PCI PnP Setup
Choose PCI/PnP Setup from the AMIBIOS Setup main menu. All PCI/PnP
options are described in this section. The PCI/PnP Setup screen is shown
below.
Plug & Play O/S
The settings for this option are Yes and No . Selecting Yes will allow the
operating system to configure PnP devices not required for setup (provided
your system has an O/S that supports PnP devices). Selecting No lets BIOS
configure PnP devices.
EMM 386
This settings for this option are Enabled and Disabled .
Watchdog Timer
The settings for this option are Disabled , 2 minutes, 5 minutes, 10 minutes
and 15 minutes.
BIOS SETUP UTILITY
Main Advanced Chipset PCIPnP Power Boot Security Exit
Plug & Play O/S
Reset Config Data
PCI Latency Timer
Allocate IRQ to VGA
Palette Snooping
PCI IDE BusMaster
USB Controller
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ14
IRQ15
[No]
[No]
[64]
[Yes]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
[Available]
No: lets the BIOS
configure all the
devices in the system.
Yes: lets the
operating system
configure Plug and
Play (PnP) devices not
required for boot if
your system has a Plug
and Play operating
system.
↔
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V07.00 (C)Copyright 1985-2001, American Megatrends, Inc.