Supermicro SUPERSERVER 6011H, User Manual, Page: 49 / 112

Chapter 5: Installation
5-15
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JP52 on the motherboard.
Refer to the table on the right for
pin definitions.
Extra Universal Serial Bus
Connection (USB3)
An additional connection for USB3
is located at J214 on the
for front side USB access. You
will need a USB cable (not in-
cluded) to use this connection.
Refer to the table on the right for
pin definitions.
Pin
Number
1
2
3
4
Definition
+5V
Key
IRRX
G round
USB3 Pin
Definitions (J214)
Power LED
The Power LED connection is lo-
cated on pins 15 and 16 of JF1. It
is used to provide indication that
power is being supplied to the
system. Refer to the table on the
right for pin definitions.
Pin
Number
15
16
Definition
5V
Control
Power LED
Pin Definitions
(JF1)
Pin
Number
1
2
Definition
Signal
Ground
Chassis Intrusion
Pin Definitions (JP52)
Fan H eader Pin Definitions
(CPU/CHASSIS/OH F ans)
Pin
Number
1
2
3
Definition
Ground (black)
+12V (red)
Tachometer
Caution: These fan headers
are D C power.
Fan Headers
The motherboard has CPU, chas-
sis and overheat fan headers des-
ignated CPU, CHASSIS and OH
FAN, respectively. See the table
on the right for pin definitions.