Supermicro SUPERSERVER 6010H, User Manual

Page: 54 / 110

5-20
S
UPER
S
ERVER
6010H
Manual
BIOS Select
The has two BIOS sock-
ets. If you have a BIOS chip in-
stalled in each, you can use the
second as a backup if the primary
B I O S c h i p b e c o m e s c o r r u p t e d .
(Switching from one BIOS chip to
the other must be done manually.)
The setting of jumper JP57 deter-
m i n e s w h i c h o f t h e t w o B I O S
chips will be used. The Primary
BIOS chip is the default setting.
See Table 5-24 for jumper set-
tings.
J u m p e r
Position
1-2
2-3
Definition
Primary BIOS
S e c o n d a r y B I O S
Table 5-24
BIOS Select
Jumper Settings (JP57)
LAN 1 Enable/Disable
Use jumper JP58 to enable or dis-
able the onboard LAN 1 (Ethernet)
port. The default setting is en-
abled. See Table 5-25 for jumper
settings.
J u m p e r
Position
O p e n
C l o s e d
Definition
E n a b l e d
D i s a b l e d
Table 5-25
LAN 1 Enable/Disable
Jumper Settings (JP58)
LAN 2 Enable/Disable
Use jumper JP62 to enable or dis-
able the onboard LAN 2 (Ethernet)
port. The default setting is en-
abled. See Table 5-26 for jumper
settings.
J u m p e r
Position
O p e n
C l o s e d
Definition
E n a b l e d
D i s a b l e d
Table 5-26
LAN 2 Enable/Disable
Jumper Settings (JP62)
VGA Enable/Disable
Use jumper JP60 to enable or dis-
able the onboard Rage XL AGP
controller. The default setting is
e n a b l e d . S e e T a b l e 5 - 2 7 f o r
jumper settings.
J u m p e r
Position
1-2
2-3
Definition
D i s a b l e d
E n a b l e d
Table 5-27
VGA Enable/Disable
Jumper Settings (JP60)