9
8
SuperServer 5019P-MT/MTR User's Manual
Chapter 1: Introduction
1.2 Unpacking the System
Inspect the box the SuperServer 5019P-MT/MTR was shipped in and note if it was damaged
in any way. If any equipment appears damaged, please file a damage claim with the carrier
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description
Part Number
Quantity
Air Shroud
MCP-310-19007-0N
1
1U 4-Port 12Gbps Backplane Support 4x3.5" SAS/SAS HDD/SSD
BPN-SAS3-815TQ
1
1U Passive CPU Heat Sink
SNK-P0067P
1
Riser Card with PCI-E x16 output
RSC-RR1U-E16
1
Set of four SATA 56/45.5/35/23CM round S-RA. 26AWG cables
CBL-0186L
1
8-pin to 8-pin round SGPIO cable, 40cm, 28AWG, pinout 1-1 cable
CBL-CDAT-0661
1
40 x 40 x 28-mm fans
FAN-154L4
4
1.3 System Features
The following table provides you with an overview of the main features of the 5019P-MT/MTR.
Please refer to Appendix C for additional specifications.
System Features
Motherboard
5019P-MT/MTR
Chassis
5019P-MT: SC813MFTQC-350B
5019P-MTR: SC813MFTQC-R407CB
CPU
Supports an Intel Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA3647) processor with a thermal design
power (TDP) of up to 205W and 28 cores
Note:
The X11SPi-TF motherboard does not support FPGA or Fabric processors.
Socket Type
Socket P0-LGA3647
Memory
Up to 256 GB of RDIMM, 512 GB of LRDIMM, and 1 TB of 3DS LRDIMM DDR4 ECC memory with speeds of
up to 2666 MHz and up to 128 GB size at 1.2V
Note:
Memory speed support depends on the processors used in the system.
Chipset
Intel PCH C622
Expansion Slots
One (1) PCI Express 3.0 x16 slot (CPU SLOT6)
One (1) M.2 PCI Express 3.0 x4 slot (supports M-Key 2280 and 22110)
Hard Drives
Four (4) hot-swap 3.5" SATA hard drives
Power
5019P-MT: single 350 Watts power supply
5019P-MTR: dual 400 Watts power supply
Form Factor
1U rackmount
Dimensions
(WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm)
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 5019P-MT/MTR. The
5019P-MT/MTR is based on the X11SPi-TF motherboard and the SC813MFTQC-350B/R407CB
chassis. The only difference between the two systems is their power supplies. The 5019P-MT
comes with a single 350 Watts power supply, while the 5019P-MTR comes equipped with
dual 400 Watts power supplies.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below:
