Supermicro SuperServer 5019C-MHN2 User Manual Download Page 91

Page: 91 / 139

Chapter 6: BIOS

Use this feature to select which firmware to be loaded for LAN Port1 used for system boot.

The options are Disabled and

Enabled

Onboard LAN Option ROM Type

Use this feature to select which firmware to be loaded for onboard LAN devices. The options

Legacy

and EFI. Select Legacy to display and configure the Onboard LAN1 ~ LAN8 Option

ROM features.

Onboard LAN1 Option ROM

Use this feature to select which firmware function to be loaded for LAN Port1 used for system

boot. The options are Disabled and

PXE

Onboard LAN2 Option ROM

Use this feature to select which firmware function to be loaded for LAN Port2 used for system

boot. The options are

Disabled

, PXE, and iSCSI.

Network Stack

Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible

Firmware Interface) for network stack support. The options are

Enabled

and Disabled.

*If the feature above is set to Enabled, the next seven features will be available for

configuration:

Ipv4 PXE Support

Select Enabled to enable IPv4 PXE boot support. The options are Disabled and

Enabled

Ipv4 HTTP Support

Select Enabled to enable IPv4 HTTP boot support. The options are

Disabled

and Enabled.

Ipv6 PXE Support

Select Enabled to enable IPv6 PXE boot support. The options are Disabled and

Enabled

Ipv6 HTTP Support

Select Enabled to enable IPv6 HTTP boot support. The options are

Disabled

and Enabled.

IPSEC Certificate

The feature appears if Network Stack is enabled. Internet Protocol Security (IPSEC) offers

a secure connection for remote computers using a secure tunnel. The options are

Enabled

and Disabled.

PXE boot wait time

Summary of Contents for SuperServer 5019C-MHN2












































































































































Search results

Summary of Contents for SuperServer 5019C-MHN2

Reviews:

Related manuals for SuperServer 5019C-MHN2

Brands by name

Popular brands

Supermicro SuperServer 5019C-MHN2, User Manual

Search results

Summary of Contents for SuperServer 5019C-MHN2

Reviews:

Related manuals for SuperServer 5019C-MHN2

Brands by name

Popular brands