Supermicro SuperServer 5019C-MHN2 User Manual Download Page 90

Page: 90 / 139

SuperServer 5019C-MHN2 User's Manual



PCIe/PCI/PnP Configuration

Option ROM execution

Video

Use this feature to select the execution of the video OpROM. The options are Do not launch,
UEFI, and

Legacy

PCI PERR/SERR Support

Use this feature to enable or disable the runtime event for PCI errors. The options are

Disabled

and Enabled.

Above 4G MMIO BIOS Assignment

Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are

Disabled

and

Enabled.

BME DMA Mitigation

Enable this feature to help block DMA attacks. The options are Enable and

Disable

Onboard Video Option ROM (available on X11SCZ-F)

Use this feature to select which firmware function to be loaded for LAN Port1 used for system

boot. The options are Disabled,

Legacy

, and EFI.

PCIe/PCI/PnP Configuration

PCH SLOT4 PCI-E 3.0 X4 (IN X8) OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

CPU SLOT6 PCI-E 3.0 X16 OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

PCH SLOT7 PCI-E 3.0 X4 (IN X8) OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

PCI-E M.2-M1 OPROM

Use this feature to select which firmware to be loaded for the add-on card in this slot. The

options are Disabled,

Legacy

, and EFI.

Onboard LAN1 SUPPORT

Summary of Contents for SuperServer 5019C-MHN2












































































































































Search results

Summary of Contents for SuperServer 5019C-MHN2

Reviews:

Related manuals for SuperServer 5019C-MHN2

Brands by name

Popular brands

Supermicro SuperServer 5019C-MHN2, User Manual

Search results

Summary of Contents for SuperServer 5019C-MHN2

Reviews:

Related manuals for SuperServer 5019C-MHN2

Brands by name

Popular brands