58
Chapter 3: Maintenance and Component Installation
Figure 3-12. Installing Riser Cards
The 220HE-FTNR/220HE-FTNRD includes three riser cards to support the use of expansion
(add-on) cards.
Before following the procedure below to install expansion cards, first turn off and remove
power from the system as described in section 3.1 then remove the top cover.
Installing Expansion Cards
1. Remove the top cover and pull up the riser card brackets.
•
For the right side (looking from the node front), open the clip of each slot on the right.
2. Remove the blank PCI shield from the chassis.
3. Slide the expansion card shield into the open shield slot while plugging the expansion
card into the riser card.
