Supermicro SUPERSERVER 1028UX-TR4, User Manual

Page: 125 / 130

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the Power-On Self-Test (POST) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors
are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue with bootup procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps + 1 long beep Memory error No memory detected in the system
5 beeps No Con-In or No
Con-Out devices
Con-In: USB or PS/2 keyboard, PCI
or Serial Console Redirection, IPMI
KVM or SOL
Con-Out: Video Controller, PCI or
Serial Console Redirection, IPMI
SOL
1 beep per device Refresh 1 beep for each USB device
IPMI Error Codes
1 Continuous Beep System OH System Overheat