Supermicro SUPERSERVER 1028UX-CR-LL1, User Manual

Page: 119 / 128

Chapter 7: BIOS
7-37
Use this feature to set the administrator password which is required before entering
the BIOS setup utility. The length of the password should be from 3 characters
to 20 characters long.
User Password
Use this feature to set the user password which is required to enter the BIOS
setup utility. The length of the password should be from 3 characters to 20 char-
acters long.
7-7 Boot Settings
Use this feature to configure Boot Settings:
Boot Configuration
Setup Prompt Timeout
Use this item to indicate how many seconds the system shall wait for the BIOS setup
activation key to respond before the system starts to boot. The default setting is
1 .
Boot Mode Select
Use this item to select the type of device to be used for system boot. The options
are Legacy, UEFI, and
Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices from which the system will boot.
Press <Enter> on each entry from top to bottom to select devices.