Supermicro SUPERSERVER 1028TR-T, User Manual

Page: 86 / 144

6-2
SUPERSERVER 1028TR-T/TF User's Manual
Figure 6-1. Front and Rear Chassis Views
6-2 Control Panel
The control panel is located on the front of the chassis. The LEDs inform you of
system status.
See Chapter 3 for details on the LEDs and the control panel buttons.
6-3 Removing Power from the System
Before performing some setup or maintenance tasks, use the following procedure
to ensure that power has been removed from the system.
1. Use the operating system to power down the node, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply. If your
system has dual power supplies, remove the cords from both power supplies.
3. Disconnect the cord from the power strip or wall outlet.
Ethernet Ports
USB Ports COM1 Port
IPMI LAN Port
VGA Port Infi niband Port
UID
SATA Drives (8)
Control Panel Control Panel