Chapter 2: Overview
1-9
PC Health
CPU Monitoring
Monitoring
•
Onboard voltage monitors for MEM_AB, MEM_CD,
MEM_EF, MEM_GH, +3.3V, 3.3VSB, +5V, +5V
Standby, 12V and Battery Voltage.
•
CPU 6-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware thermal man
-
agement via IPMI 2.0
•
Low noise fan speed control
LED Indicators
•
System/CPU Overheat LED
•
Suspend-state LED
•
UID/Remote UID LED
System
Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
System resource alert via SuperDoctor® III
•
Thermal Monitor 2 (TM2) support
•
SuperDoctor® III, Watch Dog, NMI
•
Chassis Intrusion Header and Detection
Dimensions
•
16.50" (L) x 12.80" (W) (419.10 mm x 325.12 mm)
Note 1:
For IPMI Configuration Instructions, please refer to the Embedded
IPMI Configuration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Note 2:
Changing BMC log-in information is recommended during initial
system power-on. The default username is ADMIN and password is
ADMIN. For BMC best practices, please refer to: http://www.supermicro.
com/products/nfo/files/IPMI/Best_Practices_BMC_Security.pdf
Note 3:
Changing BMC log-in information is recommended during initial
system power-on. The default username is ADMIN and password is
ADMIN. For BMC best practices, please refer to: http://www.supermicro.
com/products/nfo/files/IPMI/Best_Practices_BMC_Security.pdf
