4-14
X8DA6/X8DAE
User’s Manual
PCI/PnP Configuration
Clear NVRAM
This feature clears NVRAM (Non-volatile RAM) during system boot. The options
are
No
and Yes.
Plug & Play OS
Select Yes to allow the OS to configure Plug & Play devices. (This is not required
for system boot if your OS supports Plug & Play.) Select
No
to allow the AMI BIOS
to configure all devices in the system.
PCI Latency Timer
This feature sets the PCI Latency timer for each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32,
64
, 96,
128, 160, 192, 224 and 248.
PCI IDE BusMaster
When this feature is enabled, BIOS uses PCI bus mastering to read and write to
IDE drives. The options are Disabled and
Enabled.
SR-IOV Supported
Select Enabled to enable Single Root I/O Virtualization (SR-IOV) support which
works in conjunction with the Intel Virtualization Technology and allow multiple op-
erating systems to run simultaneously within a single computer via natively share
PCI-Express devices to enhance network connectivity and performance. The options
are Enabled and
Disabled
.
Slot 1 Option ROM ~ Slot 7 Option ROM
Select Enabled to enable the Option ROM of a slot specified, which will allow the
user to boot the computer from a PCI device installed on the PCI slot. The options
are Disabled and
Enabled
.
Onboard LAN Option ROM Select
Use this feature to select the type of onboard LAN option ROM. The options are
iSCSI and
PXE
.
LAN1 Option ROM/LAN2 Option ROM
Select Enabled to enable onboard LAN1/LAN2 PXE Option ROMs to boot the
computer using a network interface. The options are Enabled and
Disabled.
LSI SAS2 2008 Option ROM
Select Enabled to enable LSI SAS2 2008 Option ROM to boot the computer using
a network interface. The options are
Enabled
and Disabled.
Summary of Contents for Supero X8DA6
Page 1: ...X8DA6 USER S MANUAL Revision 1 1a X8DAE...
Page 5: ...Preface v Notes...
Page 86: ...A 2 X8DA6 X8DAE User s Manual Notes...
