manualshive.com logo in svg

Supermicro Supero X8DA6, User Manual

Share
Download
Supermicro Supero X8DA6 User Manual Download Page 71

Chapter 4: AMI BIOS

4-11

Front Side Audio Mode

Select  HD Audio  to  enable  high-definition  audio  support  for  the  front  side  audio 

connection. Select AC'97 to use AC'97 for the front side audio connection. The 
options are 

HD Audio

 and AC'97.

Intel PCI-X Hub Configuration

This feature allows the user to configure Intel PCI-X Hub settings.

PCI Bus A0 Frequency/ PCI Bus B0 Frequency

Use this feature to select the maximum PCI bus speed to be used for PCI Bus 

specified. If Auto is selected, PCI Bus Frequency will be automatically set to the 

maximum speed of the device installed on the bus. The Options are 33 MHz PCI, 66 
MHz PCI, 66 MHz PCI-X M1,100 MHz PCI-X M1, 133 MHz PCI-X M1, and 

Auto

. 

I/O Port Decode 

This feature is used to select the decode range for I/O ports. The settings are 1K 
Decode and 

4K Decode

.

RAS Sticky Error Handling

This option allows the user to decide how to handle Sticky RAS errors. The options 
are 

Clear Errors

 and Leave Errors (unchanged).

VGA 16-Bit Decode

Select Enabled to enable the function of decoding VGA for the devices installed 
behind the PXH PCI Controller Hub. The options are 

Enabled

 and Disabled.

IDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence 
of the IDE devices and displays the following items:

SATA#1 Configuration

If Compatible is selected, SATA#1 will be set to Legacy mode. When Enhanced 
is selected, SATA#1 will be set to Native SATA mode. The options are Disabled, 
Compatible and 

Enhanced

.

Configure SATA#1 as

This feature allows the user to select the drive type for SATA#1. Select RAID (In-

tel) to enable Intel's SATA RAID firmware to configure Intel's SATA RAID settings. 
Select  RAID  (Adaptec)  to  enable Adaptec's  SATA  RAID  firmware  to  configure 

Adaptec's SATA RAID settings. Select AHCI to enable SATA Advanced Host Inter-

Summary of Contents for Supero X8DA6




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands