Supermicro Supero X7DBN User Manual Download Page 75 | Manualshive

Page: 75 / 91

background image

Chapter 4: BIOS

4-19

X

Hardware Monitor Logic

(*See the Note on Page 4-18.)

CPU Temperature Threshold

This option allows the user to set a CPU temperature threshold that will activate
the alarm system when the CPU temperature reaches this pre-set temperature
threshold. The options are 70

o

C, 75

o

C,

80

o

C

and 85

o

C. (See the note below.)

Highlight this and hit <Enter> to see the status of each item below:

CPU1 Temperature/CPU1 Second Core

CPU2 Temperature/CPU2 Second Core

PECI Agent 1 Temperature

PECI Agent 2 Temperature

PECI Agent 3 Temperature

PECI Agent 4 Temperature

System Temperature

Fan1-Fan8 Speeds

: If the feature of Auto Fan Control is enabled, the BIOS will

automatically display the status of the fans indicated in this item.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. If set to “Server”, the fan speed will be set to optimize server performance.
If the option is set to “Workstation”, the fan speed is set to optimize workstation
performance. Select “Quiet" for the fans to operate as quiet as possible. Select
“Disable” to disable the fan speed control function to allow the onboard fans to
constantly run at full speed (12V). The Options are: 1. Server, 2. Workstation, 3.
Quiet, 4.

Disable

(Fans run at full speed.)

Voltage Monitoring

The following items will be monitored and displayed:
P12V_VR0/P12V_VR1/FSB VTT/PXH Vcore/ES2B Vcore/CPU1Vcore/CPU2Vcore/
P3V3

*Note:

In the Windows OS environment, the Supero Doctor III settings take pre-

cedence over the BIOS settings. When

fi

rst installed, Supero Doctor III adopts the

temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set
in the BIOS.

«
...
73
74
75
76
77
...
»

Summary of Contents for Supero X7DBN




























































































Reviews:

No comments

Related manuals for Supero X7DBN

35891900 Series

Brand: PC Partner Pages: 16

Advanced Socket 370

Brand: BCM Advanced Research Pages: 38

Brand: MSI Pages: 104

Brand: AMPTRON Pages: 16

Brand: ST Pages: 82

IONITX-N series

Brand: Zotac Pages: 50

Brand: Raider Outboards Pages: 73

Brand: Supero Pages: 80

Brand: Analog Devices Pages: 16

Brand: Zamel Pages: 3

Brand: EPC Pages: 6

Brand: DFI Pages: 177

Brand: ASROCK Pages: 237

Brand: Texas Instruments Pages: 28

Brand: J&W Pages: 39

Brand: PC Chips Pages: 49

Brand: TYAN Pages: 103

Brand: SOYO Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands