C-2
X6DVA-4G/X6DVA-EG User's Manual
To configure SATA RAID for Operating Systems that support RAID
functions(--Windows, Red Hat & SuSe, Linux)
1. Select "Advanced Setting" from the AMI BIOS menu.
2. Select the IDE Configuration menu.
3. Change the IDE Configuration to "P-ATA Only."
4. Under the item-"Configure S-ATA as RAID", select "Yes".
5. Tap the <Esc> key and scroll down to "Exit". Select "Save and Exit"
from the "Exit" menu. Press the <Enter> key to save the changes and exit
the BIOS.
6. Once you've exited the BIOS Utility, the system will re-boot.
7. During the system startup, press the <Ctrl> and the <A> keys simulta-
neously to run the Adaptec RAID Configuration Utility when prompted by
the following message:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
Summary of Contents for Supero X6DVA-4G
Page 1: ...X6DVA 4G X6DVA EG USER S MANUAL Revision 1 1 SUPER...
Page 9: ...Chapter 1 Introduction 1 3 Introduction Figure 1 1 SUPER X6DVA 4G X6DVA EG Image...
Page 22: ...1 16 Introduction X6DVA 4G X6DVA EG User s Manual Notes...
Page 78: ...4 24 X6DVA 4G X6DVA EG User s Manual Notes...
