Supermicro Supero X6DVA-4G User Manual Download Page 67

Page: 67 / 110

Chapter 4: AMI BIOS

4-13

Intel PCI-X Hub Configuration

This feature allows the user to configure the settings for Intel PCI-X Hub

chipset.

PXH Channel A/Channel B Bus Frequency

This feature allows the user to set the maximum PCI bus speed to be pro-

grammed. The options are Auto, 33MHz PCI, 66MHz PCI, 66MHz PCI-X M1,

100MHz PCI-X M1, and 133MHz PCI-X M1. The default setting for PCI-X CHA

is 100MHz PCI-X M1. The default setting for PCI-X CHB is 133MHz PCI-X M1.

I/O Port decode

Select the decode range for IO. The options are 4K Decode and 1K De-

code.

RAS Sticky Error Handling

Select the method for AMI BIOS to handle Sticky RAS Errors. The options

are Clear Errors and Leave Errors.

VGA 16-bit Decode

Select Enabled to enable the function of decoding of VGA for the devices

installed behind PHX. The options are Enabled and Disabled.

PCI-X Slot5/Slot6 Option ROM

Select Enabled to enable the function of Option ROM for PCI-X Slot5/Slot6.

The options are Enabled and Disabled.

Summary of Contents for Supero X6DVA-4G















































































































Search results

Summary of Contents for Supero X6DVA-4G

Reviews:

Brands by name

Popular brands

Supermicro Supero X6DVA-4G, User Manual

Search results

Summary of Contents for Supero X6DVA-4G

Reviews:

Brands by name

Popular brands